Product Description
This is a direct replacement for the factory unit but allows stand-alone (non-PCM) operation where customers are installing these in race applications or where stand-alone engine management is used (i.e. Holley as an example) The included plug has the Ford Spec resistor in the lamp/excite wire to preserve the regulator. This unit is significantly higher output than stock, 100 idle 200 max, and requires a #4 power cable with fuse protection. We make these cables and have a variety of standard and custom lengths available.
In some cases, this will eliminate the cam position sensor code error. This unit will increase the charging capacity at all RPM Ranges with NO modifications. The stock belt can be used on original equipment vehicles
Applications: 2007-2008 Mustang Shelby GT500 or anywhere the motor is used.
WARNING: California PROP65 Cancer and Reproductive Harm Notice www.P65Warnings.ca.gov
